sales@lubrication-equipment.com
lubrication-equipment bannerpic02

Fantastic Prices
Quality Guarantee
Parts After-Sales Supported

Lubrication Equipment

ProductsContact Us
Home2026-06-15T11:29:02+00:00

– Why Lubrication Equipment Needed? –

Adding grease by a lubrication equipment or lubrication system between two opposing rubbing surfaces to form a layer of antifriction lubricant film will reduce the friction coefficient, reducing friction and decreasing power consumption. For example, if the friction is based on good fluid conditions, the friction coefficient will be pretty low, and at this point of friction between the liquid lubricating film is mainly internal molecules slipping each other with a low shear resistance.

The lubricant or grease between the friction surfaces can greatly reduce adhesive wear, surface fatigue wear, abrasive wear and corrosion wear. If oxidation added in the lubricant, corrosion inhibitors have been conducive to corrosion and wear, or in oily agent, extreme pressure agents , extreme pressure agents can effectively reduce adhesive wear and surface fatigue wear.

Lubricants can reduce the friction coefficient, reducing the generation heat of friction, which can reduce the temperature rise caused by frictional heat. Using lubrication equipment, centralized lubrication system can take away the heat generated by friction, by cooling the temp. in order to control the mechanical operation within the required temperature range.

The mechanical surface is inevitable and surrounding media exposure (such as air , moisture, water vapor, corrosive gases and liquids, etc.), so that the metal surface will rust, corrosion and damage after certain time. Especially the high-temperature workshop like metallurgical plants and chemical plants, is even more serious corrosion and wear.
The lubrication grease or oil on metal with no corrosion, but they can used be to isolate from humid air moisture and harmful media. The metal surface needed to coat with preservative and anti-corrosion additives of oil or grease to prevent corrosion and erosion.

Friction wear particles and foreign media particles will be further accelerated wear of the friction surface, but it can be taken away by the lubricant circulating oil system, and then filter it again through a filter. Engine grease or oil can also disperse dust and all kinds of sediment to keep the engine clean.

Friction lubricant adsorbed on the surface, although the thickness is very small, but it has the ability to absorb impact from shock loading, and playing a role in damping down noise as well.
Steam engines , compressors, internal combustion engine with a piston , lubricating oil can not only play the role of lubrication friction, but also enhance the sealing effect, it does not leak in operation, improve work efficiency.

– The Key Principle Of Lubrication System –

  • Right Lubricating Time
    Automatically changing lubrication grease and presetting the time, making maintenance facility easily.
  • Right Place Installation
    Lubrication equipment or component should be installed in the right working place for grease requirement.
  • Right Grease Amount
    The precision of grease feeding is key for lubrication system, not too much, just right amount
  • Right Qualified Component 
    Selection of good quality of lubrication component not only saving time but maintenance cost
  • Right Device Type
    Choosing the correct lubrication device is doing good for protection of lubrication equipment & system.

    –  What We Offer About Lubrication Equipment –

Lubrication Grease Pumps:

Lubrication Distributors:

Lubrication Systems:

  • Grease, Oil Lubrication Systems (The Whole Lubrication Units For Lubricating)

Lubrication Valves:

Lubrication Accessories:

CHECK OUR FEATURE PRODUCTS OF LUBRICATION SYSTEM

Progressive-Valve-SSV

SSV Valves

Metering-Device VSG

VSG Distributor

Metering Device VSL

VSL Distributor

Distributing Valve DV, SDPQ Series

DV Distributor

Lubrication Pump DDB Series, Grease Lubrication Pump

Lubrication Pump DDB10

Lubrication-Pump-DRB-P,-DRBZ-P-Greasing-Lubrication-Pump

Lubrication Pump DRB-P, DRBZ-P

Grease-Lubrication-Pump-DDRB-N

Lubrication Pump DDRB-N, ZB

Manual Grease Pump SRB-J(L), FB Series

Lubrication Pump SRB-J(L), FB

Lubrication Products

– No Worry About Environments If Choosing Our Goods –

See More Lubrication Products

Lubrication Distributors

See More Products

Lubrication Pumps

See More Products

Lubrication Valves

See More Products

Lubrication Equipment – Component Applications:
All Sorts Of Excavators Lubrication Systems – Heavy & Light Forklift Lubricates – Steel Material Handler Lubrication Systems – Heavy Wheel Or Tractor Loader Lubrication Lines – Conveyor Belt Lubricates.

Lubrication Systems In Many Industrial Fields:
Mining Machinery- Forestry Machines – Construction Machinery – Quarrying Machinery – Mining Machines – Agriculture Machinery – Waste & Recycling Equipment – Materials Handling Industry.

Customer Reviews

“Products as I needed. Inexpensive Chinese lubrication parts, but perfect for my needs.”
Justin Markman
“Same as original at a fraction of the cost, fit exactly like the factory parts. Will update in the long term after using.”
Michael Patrick
“We actually used these distributors as replacement in our lubrication projects. We checked and these were working OK and the price was good. They fit perfectly and are operating great.”
Richard Schneider
“Why pay a lot more for overpriced original parts? These work just fine…better actually. These fit perfectly and have no problems at all.”
Antonio Gorez
Contact Us Now
Don`t copy text!
Go to Top