Lubrication Pump DDB Series, Grease Lubrication Pump DDB-10

Product:DDB-10 Multipoint Grease Lubrication Pump
Products Advantage:
1. Leading lubrication pump supplier from China, exporting to more than 50 countries in world
2.  With 10 lubrication points, high duty of injectors, 2 injectors free for each order
3. Fantastic prices for your equipment or business, all brand new materials with longer service life than other brand
Pump Element:  DDB Pump Element

Grease Lubrication Pump DDB10 Introduction

lubricating grease to each lubrication requirement spot.
– Powerful, new electric motor equipped with, easy lubricating to spot in a long-distance transmission
– 10 Multipoint  grease injectors acceptable, less injector block option, standard or custom motor power available
– Reducing parts wear quickly, extend the service life of equipment, less maintenance to save labor repair cost while operation

Inner Structure:
1. Electric motor | 2. Inner worm | 3. Gear worm shaft | 4-5-6. Grease | 7. Eccentric shaft | Connection Pin | 9. Driven disk | 10.Inner piston | 11. Grease driven plate | 12. Grease stirring rod


Ordering Code Of Grease Lubrication Pump DDB10


(1) Producer = Hudsun Industry
(2) DDB = DDB Multi-Point Lubrication Pump
(3) Nos. Of Outlet Port  = DDB 01 ~ DDB 36 For Option
(4) Motor Installation Position:
Vertical Installation (Only for Outlets 10 and below 10 numbers )
H =
Horizontal Installation
(5) * = For further information

Feature Of Electric  Motor Vertical Installation:
– Small space for working space
– Safety stalled in wet and dusty position
– More powerful operation and easily parts replacement

Feature Of Electric  Motor Horizontal Installation:
– Reliable working operation
– Less production cost and price
– Simply connection and little working problems

DDB-10-Motor-horizontal and vertical installation

Grease Lubrication Pump DDB10 Technical Data

ModelInjector Nos.Pressure (MPa)Feeding (ml/time)Feed Time (stroke/min.)Tank

Note: Using the medium for cone penetration is not less than 265 (25 ℃, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #). Better operating ambient temperature 0 ~ 40 ℃.

Grease Lubrication Pump DDB10 Feature:

Compact Design Of DDB10 Feeding Points Option
– There are multiple lubrication point available from 10 to 36 ports, multi-cycle oil port supplying
– Effective lubricating without lubrication divider and saving cost
– Small & compact size for little industrial equipment


Best Electric Motor Selection (Never Using Second Hand Materials)
– Choosing the most famous band motor as power, reliable operation
– Electric motor supplied should be passed China Compulsory Certification
– 100% Tested before delivery

Heavy Duty Parts
– Wire connection board, easily reading
– Filtered grease fill in, one way check threaded connection connector
– High quality electric motor power guaranty, more than one year service life


Grease Lubrication Pump DDB10 Installation Dimensions


Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.