The Working Conditions Of SGLL Double Oil Cooler
SGLL double oil cooler is designed and manufactured according to GB standard and reference to Germany AD and US TEMA Standard. All of the raw materials are steel and partial brass as construction, oil side working pressure with 1.6MPa, working temperature 150℃, water side working pressure 1.0MPa, working temperature 100℃. SGLL double oil cooler with energy saving, efficient, safe and reliable, etc .; for steam turbine, motor units, compressor units, fans, pumps and oil and oil industry on the oil cooling system can also be used for other oil cooling system.
The characteristics Of SGLL Double Oil Cooler
1. The tablet of data for the two flow tube double oil cooler, if you need to use four processes, six processes, bare tube or fin cooling tube cooler.
2. The cooler installation is usually horizontal, such as the user can need to use two vertical arrangement, a water chamber in the next, another water room in the room for easily remove.
3. Oil and water interface flange standard JB / T81-94, according to user requirements with non-standard flange should meet the piping requirements.
4. According to API 614 standard, the cooler with double structure, by the same area of two coolers and three-way valve device, a work, one prepared with each cooler capable of withstanding the cooling load of the entire system, with a tube plate fixed, a floating, removable tube bundle and a water chamber lid for easy operation, wash, check and repair. Cooler material, depending on the use of places, water system conditions can have a variety of options, water room, shell, three-way valve optional carbon steel or all stainless steel,
Tube board available carbon steel, stainless steel or brass plate; pipe material optional ordinary brass tube H68, arsenic brass tube H S n70-1A, aluminum brass tube H A177-2A, stainless steel pipe
1Cr18Ni9Ti, B10, B30 and so on.
5. Three-way valve with steel welded structure continuous flow switch valve. This valve in the internal structure of the failure or valve conversion period will not cause oil interruption. Shape as shown below.