Product: Progressive Distributor ZP-A, ZP-B Series, Lubrication Progressive Distributors For Central Lubrication System
1. Feeding volume from 0.07 to ml/stroke optional
2. ZP-A & ZP-B for different feeding volume requirement, max. pressure up to 160bar
3. Volume marked on each segment for replacement or repairing, easily maintenance
Equal Code With ZP & JPQ:
ZP-A = JPQ1-K
ZP-B = JPQ2-K
Progressive distributor ZP-A, ZP-B series with two different range of feeding volume: ZP-A of 0.07ml/stroke, 0.10ml/stroke, 0.2ml/stroke & 0.3ml/stroke, or for large feeding requirement to select: ZP-B 0.5ml/stroke,1.2ml/stroke, 2.0ml/stroke. The series of progressive distributor ZP-A, ZP-B is be able to integrated according to amount for grease requirement for different lubrication point and the number of lubrication points.
If central lubrication system needs many lubrication points or the lubrication point is decentralized, two-level volume or three feeding volume which is available to supply oil or grease in progressive line to lubricating point. (Two level volume is often for oil medium, and the grease feeding volume is usually for grease medium).
Circulating indicator with progressive distributor ZP-A, ZP-B can be equipped to monitor lubrication system operation status(optional). Over-pressure indicator or safety valve can be equipped to indicate the overload of lubrication.
How to assemble segment:
Each integrated distributor consists of top segment (A), middle segment(M) and the end segment(E). The minimum pieces of middle segment should be non less than 3 pieces, additional to top and end segment each, while the max. number of middle segment should be 10 pieces.
If there is a add number for lubrication points or volume of lubricating needed to increase, it is available to combine the next segment (Inner chamber connection), or by adding joint block or connected with tee to become a one outlet (Supply line blocked is not allowed).
Ordering Code Of Progressive Distributor ZP-A, ZP-B Series
(1) Distributor Type = ZP-A Or ZP-B Progressive Distributor
(2) Segment Numbers = 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 Optional
(3) Nominal Pressure K= 16MPa(2,320PSI)
(4) Feeding Volume: ZP-A : 0.07ml/stroke; 0.1ml/stroke; 0.2ml/stroke; 0.3ml/stroke ; ZP-B : 0.5ml/stroke; 1.2ml/stroke; 2.0ml/stroke
(5) Indicator Type: XYS-1 / XYS-2 Optional
(6) Outer Diameter Of Inlet Pipe: ZP-A: 4=Ø4; 6=Ø6 ; ZP-B: 8=Ø8
(7) Outer Diameter Of Outlet Pipe: ZP-A: 6=Ø6; 8=Ø8 ; ZP-B: 10=Ø10 ; ZP-B: 12=Ø12
Progressive Distributor ZP-A, ZP-B Series Technical Data
|Model||Volume per outlet
|Middle Segment Nos.||Outlet Nos.||Diameter Of Inlet Pipeline||Diameter Of Outlet Pipeline|
|ZP-A||0.07, 0.1, 0.2, 0.3||≤10||3~10||6~20||Ø6 ; Ø8||Ø4 ; Ø6|
|ZP-B||0.5, 1.2, 2.0||≤10||3~10||6~20||Ø10 ; Ø12||Ø8|
Lubrication Distributor ZP-A/B Operation Function
Grease pressed into piston chamber through inlet channel, pushing each piston orderly.
Drawing A: The Piston A moves, and pressed the grease to nos. 6 outlet.
Drawing B: The Piston M moves, and pressed the grease to nos. 1 outlet.
Drawing C: The Piston E moves, and pressed the grease to nos. 2 outlet.
Drawing D: The Piston A moves, and pressed the grease to nos. 3 outlet.
Drawing E: The Piston M moves, and pressed the grease to nos. 4 outlet
Drawing F: The Piston E moves, and pressed the grease to nos. 5 outlet
Progressive Distributor ZP-A Installation Dimensions
Progressive Distributor ZP-B Installation Dimensions