Lubrication Pump - Grease Lubrication Pump

/, Lubrication Pumps/Lubrication Pump DDB18, DDB36 – Grease Lubrication Pump, Multipoint Lubrication Pump DDB-18, DDB-36 Series

Lubrication Pump DDB18, DDB36 – Grease Lubrication Pump, Multipoint Lubrication Pump DDB-18, DDB-36 Series

  • Lubrication Pump DDB-18
  • Lubrication Pump DDB-36

ProductDDB-18, DDB-36 Multipoint Grease Lubrication Pump 
Products Advantage:
1. Multipoint 18 or 36 lubricating injectors as per requirement
2. Quality certificated electric motor selected, heavy duty for pressure
3. Fantastic prices for economical project, better working features than other brand

DDB Grease Pump PDF

Grease Lubrication Pump DDB18, DDB36 Introduction

Lubrication pump of DDB-18, DDB-36 series is small electric lubrication system is to friction in the machine or mechanical unit as lubricating delivery system which including the greasing transportation, distribution and regulation.

While the operation of lubrication system, according to the actual conditions of all kinds of machinery equipment, reasonable selection and design methods of lubricating, lubrication system and device, to ensure that the device has good lubricating condition and working performance and longer service life, is very important significance. DDB-18, DDB-36 lubrication pump is a multipoint lubricating pump with10Mpa/100bar working pressure to feed lubrication point at presetting grease quantity and time frequency, high pressure to promote the to long-distance transmission, can install distributor for multi-point type or centralized lubrication systems, instead of manual, safe and reliable, recycling, economic and environmental protection.

Lubrication-Pump-DDB-Internal-structure

Inner Structure:
1. Electric motor | 2. Inner worm | 3. Gear worm shaft | 4-5-6. Grease | 7. Eccentric shaft | Connection Pin | 9. Driven disk | 10.Inner piston | 11. Grease driven plate | 12. Grease stirring rod

Grease Lubrication Pump DDB18,  DDB36 Technical Data

Model Injector Nos. Nominal Pressure Feeding Rate Feed Time Tank Volume Motor Power Weight
DDB-18 18 Points 10Mpa/100bar 0-0.2 ml/time 13 stroke/min 23 L 0.37 Kw 58Kgs
DDB-36 36 Points 10Mpa/100bar 0-0.2 ml/time 13 stroke/min 23 L 0.37 Kw 69KGS

Note: Using the medium for cone penetration is not less than 265 (25 ℃, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #). Better operating ambient temperature 0 ~ 40 ℃.

Grease Lubrication Pump DDB18, DDB36 Feature:

Compact Design Of DDB10 Feeding Points Option
– There are multiple lubrication point available from 10 to 36 ports, multi-cycle oil port supplying
– Effective lubricating without lubrication divider and saving cost
– Small & compact size for little industrial equipment

Lubrication-Pump-DDB18,DDB36
Lubrication-Pump-DDB-motor-certification

Best Electric Motor Selection (Never Using Second Hand Materials)
– Choosing the most famous band motor as power, reliable operation
– Electric motor supplied should be passed China Compulsory Certification
– 100% Tested before delivery

Heavy Duty Parts
– Wire connection board, easily reading
– Filtered grease fill in, one way check threaded connection connector
– High quality electric motor power guaranty, more than one year service life

Lubrication-Pump,-Grease-Lubrication-Pump-parts

Grease Lubrication Pump DDB18, DDB36 Installation Dimensions

Lubrication-Pump-DDB18, DDB36-Dimensions
2017-03-02T05:24:00+00:00