Grease Pumps - Lubrication Grease Pump

//Lubrication Grease Pump DDB36 – Multipoint Grease Lubrication Pump DDB-36 Series

Lubrication Grease Pump DDB36 – Multipoint Grease Lubrication Pump DDB-36 Series

  • Lubrication Pump DDB-36

ProductDDB-36 Multipoint Grease Lubrication Pump 
Products Advantage:
1. Multipoint 36 lubricating injectors as per requirement
2. Quality certificated electric motor selected, heavy duty for pressure
3. Fantastic prices for economical project, better working features than other brand
Pump Element:  DDB Pump Element

DDB Pump PDF

Lubrication Grease Pump DDB36 Introduction

Lubrication pump of DDB-36 series is small electric lubrication system is to friction in the machine or mechanical unit as lubricating delivery system which including the greasing transportation, distribution and regulation.

While the operation of lubrication system, according to the actual conditions of all kinds of machinery equipment, reasonable selection and design methods of lubricating, lubrication system and device, to ensure that the device has good lubricating condition and working performance and longer service life, is very important significance.  DDB-36 lubrication grease pump is a multi-point lubricating pump with 10Mpa/100bar working pressure to feed lubrication point at presetting grease quantity and time frequency, high pressure to promote the to long-distance transmission, can install distributor for multi-point type or centralized lubrication systems, instead of manual, safe and reliable, recycling, economic and environmental protection.

Lubrication-Pump-DDB-Internal-structure

Inner Structure:
1. Electric motor | 2. Inner worm | 3. Gear worm shaft | 4-5-6. Grease | 7. Eccentric shaft | Connection Pin | 9. Driven disk | 10.Inner piston | 11. Grease driven plate | 12. Grease stirring rod

Grease Lubrication Pump DDB36 Technical Data

Model Injector Nos. Nominal Pressure Feeding Rate Feed Time Tank Volume Motor Power Weight
DDB-36 36 Points 10Mpa/100bar 0-0.2 ml/time 13 stroke/min 23 L 0.55 Kw 69KGS

Note: Using the medium for cone penetration is not less than 265 (25 ℃, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #). Better operating ambient temperature 0 ~ 40 ℃.

Grease Lubrication Pump DDB36 Feature:

Compact Design Of DDB36 Feeding Points Option
– There are multiple lubrication point available from 10 to 36 ports, multi-cycle oil port supplying
– Effective lubricating without lubrication divider and saving cost
– Small & compact size for little industrial equipment

Lubrication-Pump-DDB18,DDB36
Lubrication-Pump-DDB-motor-certification

Best Electric Motor Selection (Never Using Second Hand Materials)
– Choosing the most famous band motor as power, reliable operation
– Electric motor supplied should be passed China Compulsory Certification
– 100% Tested before delivery

Heavy Duty Parts
– Wire connection board, easily reading
– Filtered grease fill in, one way check threaded connection connector
– High quality electric motor power guaranty, more than one year service life

Lubrication-Pump,-Grease-Lubrication-Pump-parts

Grease Lubrication Pump DDB36 Installation Dimensions

Lubrication-Pump-DDB18, DDB36-Dimensions

Grease Lubrication Pump DDB36 Before Operation:

  1. The multi-point lubrication grease pump DDB-36 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-36 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-36 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-36 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
2018-09-05T05:39:43+00:00
Don`t copy text!