Metering Device - Dual Line Grease Lubricant Distributor

//Lubrication Device VSL6 – Two Line Grease Metering Device

Lubrication Device VSL6 – Two Line Grease Metering Device

Grease-Metering-Valve-VSL6

Product: VSL6-KR Two Line Metering Device With Large Flow
Products Advantage:
1. High Quality Of Raw Materials: Advanced valve parts stress and strength characteristics, making reliable operation in lubrication systems.
2. Strictly Tested Of Each Product: Testing the items one by one and more than several minutes, using thin testing oil of 32# or 46# mineral oil lubricates to long distance lubrication spots completely quickly and smoothly.
3. Standard Dimensions For Replacement: Easily replacement with standard connection dimension and figure, making it quick installation and saving repair cost.

Grease Metering Valve VSL6 Introduction

There are two inlet ports of VSL6-KR oil metering valve with six outline metering feeding ports, inlet ports is connected with supplying oil pipes and powered by electrical lubrication pumps.

Oil metering valve of VSL6 series are designed for high pressure up to 400bar used for two ling centralized lubrication systems. We are choosing high quality raw materials like rust and acid proof to produce the key parts and it is good looking zinc galvanized after finishing the processing the parts manufacturing for rigorous environment working operation.

The meaning of oil metering valve VSL6 means six outlet are available for lubrication equipment, each six outlet is equipped with indicator for visual monitoring, the normal seals or Viton seals available for normal or high temperature applications.

Dual-line- Lubricant -Distributor-Inner-structure

Ordering Code Of Grease Metering Valve VSL6

VSL 2 / 4  / 6 / 8 KR *
(1) (2) (3) (4)

(1) VSL = VSL series two line metering divider
(2) Number Of Discharging (Outlet Port)= 2 ports / 4 ports / 6 ports / 8 ports
(3) KR = With indicator pin and progressive adjustment
(4) *  = Further information

Grease Metering Valve VSL6 Technical Data

Model:
VSL 6-KR
Raw Materials:
45# High strength of carbon steel
Working Pressure:
Max. operation pressure: 400bar/ 5800psi
Min. pressure
35bar / 508psi
Output volume
0~5.0cm3/stoke, adjustable
Adjusting flow by each turn
0.15cm3
Main Line Threaded Connection:
G3/8
Feed Line Threaded Connection:
G1/4

Minimum Order Quantity:
Please consult us
Package:
With strong box or cartons for exporting
Medium:
For cone penetration of not less than 265 (25°C, 150g) 1/10mm grease (NLGI0 # ~ 2 #) or greater than the N68 lubricant viscosity grades
Items Delivery:
Depends on the quantity and standard or custom design, usually 8-25 working days
Surface Treatment:
Zinc plated for resistance of corrosion
Place of Origin:
China

Grease Metering Valve VSL6 Working Operation Graphic

Pressurized lubricant is supplied to the metering device via main line I. The control piston (1) starts moving in the direction of arrow A, displacing the lubricant in front of the control piston into the relieved main line II.

Dual-line-divider-valves-working-operation-graphic-step-one

Dual-line-divider-valves-working-operation-graphic-step-two

When the control piston (1) uncovers the connecting passage (2) lubricant is transferred to the right end of the dispensing piston (3), thereby displacing it to the left in the direction of arrow A.
The lubricant volume ahead of the dispensing piston is transferred via the connection passage (4) to the lubrication point. With the dispensing piston in its terminal position, the pressure in main line I will continue to rise to reach the preset change-over pressure of the two-line system. At this stage,the change-over valve of the system operates to connect main line I which has so far been under pressure to the lubricant reservoir of the lubrication pump.

At the same time the change-over valve connects main line II to the lubrication pump, thus pressurizing the lubricant in this main line. The control piston (1) moves in the direction of arrow B, displacing the lubricant ahead of the control piston into the relieved main line I.

Dual-line-divider-valves-working-operation-graphic-step-three

Dual-line-divider-valves-working-operation-graphic-step-four

When the control piston (1) uncovers the connecting passage (5) lubricant is transferred to the left end of the dispensing piston (3) and displaces it to the right in the direction of arrow B. The lubricant ahead of the dispensing piston (3) is transferred via the connecting passage (6) to the lubrication point. With the dispensing piston (3) in its terminal position, the pressure in main line II will continue to rise to reach the preset changeover pressure of the two-line system. At this stage, the change-over valve will once again cause a pressure changing-over in main lines I and II and the cycle will be repeated as described in stage 1.

Grease Metering Valve VSL6 Output Volume Adjustment

Variation KR for infinitely variable adjustment and visual indication.Infinitely variable adjustment of lubricant output is achieved by turning the adjustment screw F. Maximum output is available if the lock screw E and the adjustment screw F are in their uppermost position. By turning the screw downward the output can be continuously reduced. With the two screws in their fully closed position, the indicator pin G is completely restrained and, because the pin is attached directly to the dispensing piston, the lubricant output will be nearly zero.
The indicator pin shows the correct functioning of a pair of outlets. After setting the lubricant output, the adjustment screw F will be locked in position by means of screw E.
To secure the setting, lock the adjusting screw only when the indicator pin is retracted.

VSL-divider-vavle-Output-volume-adjustment-method

Grease Metering Valve VSL6 Adjustment Curve

Dual-line-Lubricant-Distributor-operatation-curve

Grease Metering Valve VSL6 Installation Dimensions

Metering Device-Installation-dimensions
Model VSL 6-KR
Outer Ports 6
L1  (mm) 94
L  (mm) 108
2017-03-02T05:24:51+00:00